Last data update: May 06, 2024. (Total: 46732 publications since 2009)
Records 1-3 (of 3 Records) |
Query Trace: Brown CB[original query] |
---|
Comparison of thermal runaway pressures within sealed enclosures for nickel manganese cobalt and iron phosphate cathode lithium-ion cells
Dubaniewicz TH , Barone TL , Brown CB , Thomas RA . J Loss Prev Process Ind 2022 76 Mining vehicle manufacturers are developing lithium-ion (Li-ion) battery electric vehicles as an alternative to diesel-powered vehicles. In gassy underground mines, explosion-proof (XP) enclosures are commonly used to enclose electrical ignition sources to prevent propagation of an internal methane-air explosion to a surrounding explosive atmosphere. Li-ion batteries can create pressurized explosions within sealed enclosures due to thermal runaway (TR). NIOSH researchers measured TR pressures of nickel manganese cobalt (NMC) cathode type 18650 Li-ion cells, model MH1, as a function of free space within sealed enclosures and observed an inverse power relationship. TR pressure-rise rates, gas quantities, and temperatures were also measured. A confined NMC cell with 92.5 mL of free space produced 232 bar of pressure, far exceeding minimum pressure containment specifications for conventional XP enclosures. Approximately 287 times the cell volume of free space would be needed to reduce the TR pressure of these cells to 8.62 barg (125 psig) per U.S. Code of Federal Regulations, Title 30, Part 18. The NMC cell TR pressures were significantly higher than those measured previously for iron phosphate cathode Li-ion cells under comparable confinement conditions. 2022 |
Laboratory development and pilot-scale deployment of a two-part foamed rock dust
Brown CB , Perera IE , Harris ML , Chasko LL , Addis JD , Klima S . J Loss Prev Process Ind 2022 74 U.S. Code of Federal Regulations 30 CFR 75.402 and 75.403 require 80% total incombustible content to be maintained within 40 feet of the coal mine face via the liberal application of rock dust. Unfortunately, this application of rock dust limits miners' visibility downwind and can increase the miners' exposures to a respirable nuisance dust. Wet rock dust applied as a slurry is, at times, used to negate these negative effects. Although this aids in meeting the total incombustible limits, the slurry forms a hard cake when dried and no longer effectively disperses as needed to suppress a coal dust explosion. As a result, a dry rock dust must be reapplied to maintain a dispersible layer. Therefore, researchers from the National Institute for Occupational Safety and Health (NIOSH) have been working towards finding and testing a foamed rock dust formulation that can be applied wet on mine surfaces and remain dispersible once dried which minimizes the likelihood of mine disasters, including mine explosions. The initial tests were aimed at discerning dispersion characteristics of three different foamed rock dusts via the NIOSH-developed dispersion chamber and led to identification of a two-part foam with adequate dispersion characteristics. The current study was conducted to assess the robustness of the two-part foamed rock dust. Through a series of laboratory-scale experiments using the dispersibility chamber, the effects of testing conditions and product formulations on the foam's dispersibility was determined. Some of the tested variables include: exposing the foam to high humidity, varying the component levels of the foamed rock dust, altering the rock dust size distribution, and varying the rock dust types. Further pilot-scale tests examined the atmospheric concentrations of dust via personal dust monitors downwind of foamed rock dust production and application. Additionally, product consistency was recorded during pilot-scale testing at key points in the formulation and application. The results of these experiments will be discussed in this paper. © 2021 |
Influence of specific surface area on coal dust explosibility using the 20-L chamber
Zlochower IA , Sapko MJ , Perera IE , Brown CB , Harris ML , Rayyan NS . J Loss Prev Process Ind 2018 54 103-109 The relationship between the explosion inerting effectiveness of rock dusts on coal dusts, as a function of the specific surface area (cm2/g) of each component is examined through the use of 20-L explosion chamber testing. More specifically, a linear relationship is demonstrated for the rock dust to coal dust (or incombustible to combustible) content of such inerted mixtures with the specific surface area of the coal and the inverse of that area of the rock dust. Hence, the inerting effectiveness, defined as above, is more generally linearly dependent on the ratio of the two surface areas. The focus on specific surface areas, particularly of the rock dust, provide supporting data for minimum surface area requirements in addition to the 70% less than 200 mesh requirement specified in 30 CFR 75.2. © 2018 |
- Page last reviewed:Feb 1, 2024
- Page last updated:May 06, 2024
- Content source:
- Powered by CDC PHGKB Infrastructure